The FrogPad

Roastmaster Support => Support => Topic started by: Andy on April 03, 2014, 07:17:24 AM

Title: Grid lines
Post by: Andy on April 03, 2014, 07:17:24 AM

Danny, Is it possible to show grid lines in analyzer view? It would be helpful for me when reviewing a past roast to see visually where time & temp intersect. I have looked for that option in Roastmaster, but I am not seeing a way to do it.

Title: Re: Grid lines
Post by: Danny Hall on April 03, 2014, 11:14:08 AM

Hi Andy

There are two preference settings: X (and Y) Axis Grid Opacity. They are set at 0 by default, but you can set them to any value, depending on how strong you want the lines to appear. The X axis grid will show vertical lines for every 5 minutes. The Y axis grid will divide the curve level into fifths, and show horizontal lines for each level.

You can alter the "Max Graph Temp" preference setting to adjust where the horizontal lines fall. For example, changing that from the default of 260°C to 270°C is a good choice. That will make the top two lines represent 216 and 162, and serve as good reference guideline for when you should start to watch for 1st and 2nd crack.

Hope this helps.

Title: Re: Grid lines
Post by: Andy on April 04, 2014, 06:53:26 AM

Thanks. That is what I wanted. I had forgotten how to navigate to Utilities.  :-[