The FrogPad

Roastmaster Support => Support => Topic started by: trk_koa on January 31, 2013, 04:12:29 AM

Title: Setting up data logging
Post by: trk_koa on January 31, 2013, 04:12:29 AM
OK. So I have my phidgets thermocouple showing readings on my PC laptop. I have configured and started the web service in the phidgets control panel.

Bonjour shows it is running. Laptop and iPad are on the same wireless network.

In RoastMaster, I create a probe, enter the serial number and port 0 (I only bought the 1 port PTS).

The probe says "unlinked". Any idea what step I missed?

Laptop is running Windows 7. Is there anything I need to configure in the laptop security or anything?

I am really looking forward to getting this up and running.
Thanks! Nancy
Title: Re: Setting up data logging
Post by: trk_koa on January 31, 2013, 05:42:06 AM
Aha. I think I have figured it out. There was a mismatch in the webservice prototcol with the Phidgets latest version. I was able to find the links on their site to the older version and have installed that and I now am getting data from the stand alone thermocouple. Whoo hoo.

Now I just need to attach the thermocouple and my roaster and we will be cooking.

Nancy
Title: Re: Setting up data logging
Post by: Danny Hall on February 01, 2013, 01:32:37 AM
Hi Nancy

Glad you're up and running! I'll let the guys at Phidgets know about this. I used a previous version throughout development, and never saw this error - obviously it shouldn't be happening.

Let me know if you have any other questions.

Danny
Title: Re: Setting up data logging
Post by: Coffeeric on February 02, 2013, 05:50:47 PM
Hi Nancy,

I just encountered the same problem like what you had.  However, I am using Mac OSX.  Just wonder where do you find an older version of the driver? 

Thanks,
Eric


Aha. I think I have figured it out. There was a mismatch in the webservice prototcol with the Phidgets latest version. I was able to find the links on their site to the older version and have installed that and I now am getting data from the stand alone thermocouple. Whoo hoo.

Now I just need to attach the thermocouple and my roaster and we will be cooking.

Nancy
Title: Re: Setting up data logging
Post by: Coffeeric on February 02, 2013, 06:38:21 PM
Just got a quick response from Danny.  He gave me a link to download an older version from Phidgets website.  Looking forward to tomorrow roasting.

e.

Hi Nancy,

I just encountered the same problem like what you had.  However, I am using Mac OSX.  Just wonder where do you find an older version of the driver? 

Thanks,
Eric


Aha. I think I have figured it out. There was a mismatch in the webservice prototcol with the Phidgets latest version. I was able to find the links on their site to the older version and have installed that and I now am getting data from the stand alone thermocouple. Whoo hoo.

Now I just need to attach the thermocouple and my roaster and we will be cooking.

Nancy
Title: Re: Setting up data logging
Post by: Danny Hall on February 04, 2013, 02:28:47 AM
I Spoke to Phidgets - the error is 100% accurate. You must use the same version of the Phidget software as the internal API that Roastmaster is using inside the app. I had thought there was forward-compatibility, but this is not the case.

I will be maintaining a chart of driver compatibility in the new Setting Up Data Logging (http://rainfroginc.com/documentation/setting-up-data-logging/) post in the documentation on the main site.

Sorry for your troubles and thanks for letting me know about this.

Danny