Glad you are enjoying it!
I didn’t remove any functionality per se, but I did rework/retool many, many different things, for the sake of consistency, and clarity. Which curves display in each different “Targeting” mode was one of those things, as well as a clear distinction between “Reference Curves” vs “Data Curves”, to try and make it more clear as to their source and distinct function.
So, in the analyzer, you may have used it with targeting mode “Off” in the past, and still have seen your Profile curves displayed (Reference Curves). In version 10, you’ll need to use “Profile” targeting mode to see those “Reference Curves”. So, in the toolbar, tap the bottom left targeting button until your see “Profile/Program Targeting Mode” flash at the top. You will see all of your Profile reference curves then.
For events - if it belonged to the curve you mentioned above, changing to Profile targeting mode will fix it. If not, please make sure that “Labels” mode is turned on in the analyzer. It’s the oval button with two lines inside of it located in the bottom toolbar. If labels are turned off, events are hidden. That should make them visible.
Let me know if this resolves it - if not, we’ll dig deeper.