The FrogPad
 
A forum to get help or talk about Roastmaster…or anything else coffee.

Development from 1st crack  (Read 3123 times)

KasperV79

  • (7 Posts)
  • *
  • Karma: 0
    • View Profile
Hi guys.
Is it already possible else a wish, to have development timer starting from 1st crack.
Like this:
https://www.google.com/amp/s/petedenison.net/2014/09/09/coffee-roasting-development-time-ratio/amp/

Danny Hall

  • (383 Posts)
  • *****
  • Karma: 3
    • View Profile
    • Rainfrog
Hi Kasper

See attached screenshot.

If you enable the HUD in the Analyzer, you'll see running tallies of the following

1: Drying Stage. This is defined by the presence of an Event, with its type set to "Drying End"
2: Ramp Stage. This is defined as the time from the Drying End Event to the First Crack (beginning of development)
3: Pyrolysis: This is defined by the presence of an Event, with its type set to "Pyrolysis"
4: Development: This is defined as the start of first crack to the end of the roast.

In this HUD, Roastmaster displays real-time tallies of each of these as
1. Duration in minutes and seconds
2. Percentage of time of the whole roast.

So, Roastmaster's Percentage of Development SHOULD correlate to the information on the link you sent, i.e. Rao's Development Time Ratio. Just keep in mind this a percentage, not a true ratio - that's a different thing altogether.

If you're interested in learning how to use events, there's some good information in this screencast.

KasperV79

  • (7 Posts)
  • *
  • Karma: 0
    • View Profile
Alain thanks a lot.  :)